Answer: The angle between the wire segment and the magnetic field 66.42°
Explanation:
Please see the attachment below
From
the problem statement, this is a conversion problem. We are asked to convert
from units of grams to units of kilograms. To do this, we need a
conversion factor which would relate the different units involved. We either
multiply or divide this certain value to the original measurement depending on
what is asked. From literature, we will find that 1000 grams is equal to 1 kilogram. We use this as follows:
<span> 1.440x10^6 g ( 1 kg / 1000 g ) = 1440 kg</span><span>
</span>
Answer:

Explanation:
If the stone will reach the top position of flag pole at t = 0.5 s and t = 4.1 s
so here the total time of the motion above the top point of pole is given as

now we have



so this is the speed at the top of flag pole
now we have



now the height of flag pole is given as



Answer: The same current flows through bth cables
Explanation:
Lets have a look to the next two equations
The Ohm´s V = I*R (1)
where:
V is voltage (potencial dfference) in volts
I is the electric current in ampers
R is the electric resistance
When a voltage is applied as the electrc load is not specified ( we have to assume is the same) the current will be the same
And in the other hand the resistance R =ρL/s
Where ρ is the resistivity of the conductor L the length and s square section of the conductor
If we assume that the smaller diameter cable is able to conduct the current then nothing happens. The point is that the capacity of conduction of current depend on the section of the cable (the area)
Tables exist where to find the capacity of each cable according to its diameter.
Answer:
5.76 round off to 6
Explanation:
wall 1 = 15 × 12 = 180
wall 2 = 9 × 12 = 108
now 1 roll covers 50 square feet
formula = wall 1 + wall 2 / 50
= 180 + 108 / 50
= 288÷ 50
= 5.76