Answer:
-20v
Explanation:
Data provided in the question as per the given situation
L = 45 mH
f = 250 Hz
V_o = 20V
Based on the above information, let us assume voltage across inductor be V at t
So,

t = 2 ms
Now
The voltage at time t = 2.0 ms is


= -20 volt
= -20v
We simply solved the above equation so that the correct voltage could come
Complete Question:
Check the file attached to get the complete question
Answer:
In the film Ice word Revenge, vehicle 2 did not fall of the cliff because,
but in Claire's test, vehicle 2 off the cliff because 
Explanation:
In Claire's test, the weight of vehicle 1 is either equal to or greater than the weight of vehicle 2, so it was sufficient to push it down the cliff. In the film Ice word revenge, the weight of vehicle 1 is less than the weight of vehicle 2, it is not sufficient to make it fall off the cliff ( Note: Looking exactly the same in the movie, as Claire claimed, does not mean they have the same mass). Therefore if Claire wants a collision that will not make the vehicle 2 fall off the cliff, he should collide it with a vehicle of lesser mass/weight.
Answer:
Savannas have a fairly constant temperature all year; temperate grasslands have a greater seasonal temperature variation.
Explanation:
For example, the African Savanna has an almost constant temperature all year (see the first figure below).
The difference between summer and winter temperatures is only about 5 °C, and the rate of temperature change is quite slow.
The temperature of a temperate grassland (see the second figure below) has a much greater seasonal variation.
The summers are hot, and the winters are cold. The difference between summer and winter temperatures is about 30 °C, with a rapid rate of temperature change from one season to the next.
Answer: The released electromagnetic wave will travel in +y direction
Explanation:
It should be noted that, in a situation, whereby an excited hydrogen atom releases an electromagnetic wave to return to its normal state. And it's also evident that the futuristic dual electric/magnetic field tester on the electromagnetic wave to find the directions of the electric field and magnetic field is used. Eventually, your device tells you that the electric field is pointing in the positive y direction and the magnetic field is pointing in the positive x direction. Therefore, the released electromagnetic wave will travel in +y direction.