answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
S_A_V [24]
2 years ago
10

A mercury manometer (rho = 13,600 kg/m3) is connected to an air duct to measure the pressure inside. The difference in the manom

eter levels is 30 mm, and the atmospheric pressure is 100 kPa. (a) Judging from Fig. P1–65, determine if the pres- sure in the duct is above or below the atmospheric pressure. (b) Determine the absolute pressure in the duct
Physics
1 answer:
beks73 [17]2 years ago
3 0

Answer:

P = 104 kPa

Explanation:

a) To know if the pressure is higher or lower than the atmospheric, we only have to see the tubes if the right side is higher the pressure is higher than the atmospheric, otherwise it is lower.

b) The pressure in a system is

          P = P_{atm} + ρ g (Y2-y1)

Where P_{atm} is the atmospheric pressure in the open part of the tuno,ρ is the liquid density and (y2-y1) is the difference height between the two sides of the tube.

Let's reduce to SI units

         (y2-Y1) = 30 mm (1m / 1000 mm) = 30 10-3 m

        P_{atm} = 100 KPa = 100 10 3 Pa

Let's calculate the pressure

       P =  P_{atm}  + 13.6 9.8 30 10⁻³

       P = 100 10³ + 3,998

       P = 103,998 Pa

      P = 104 kPa

You might be interested in
Which occurrence would lead you to conclude that lights are connected in a
skelet666 [1.2K]

Answer:B When one bulb burns out, all the others lights stay lit.

Explanation:

3 0
2 years ago
Pions have a half-life of 1.8 x 10^-8 s. A pion beam leaves an accelerator at a speed of 0.8c. What is the expected distance ove
Nuetrik [128]

Answer:

the expected distance is 4.32 m

Explanation:

given data

half life time = 1.8 × 10^{-8} s

speed = 0.8 c = 0.8 × 3 × 10^{8}

to find out

expected distance over

solution

we know c is speed of light in air is 3 × 10^{8} m/s

we calculate expected distance by given formula that is

expected distance = half life time × speed   .........1

put here all these value

expected distance = half life time × speed

expected distance = 1.8 × 10^{-8} ×  0.8 × 3 × 10^{8}

expected distance = 4.32

so the expected distance is 4.32 m

5 0
2 years ago
Bill leaves his 60 W desk lamp on every day, including weekends, for eight hours. After one month (30 days), how much total ener
maxonik [38]

' W ' is the symbol for 'Watt' ... the unit of power equal to 1 joule/second.

That's all the physics we need to know to answer this question.
The rest is just arithmetic.

(60 joules/sec) · (30 days) · (8 hours/day) · (3600 sec/hour)

= (60 · 30 · 8 · 3600) (joule · day · hour · sec) / (sec · day · hour)

= 51,840,000 joules
__________________________________

Wait a minute !  Hold up !  Hee haw !  Whoa ! 
Excuse me.  That will never do.
I see they want the answer in units of kilowatt-hours (kWh).
In that case, it's

(60 watts) · (30 days) · (8 hours/day) · (1 kW/1,000 watts)

= (60 · 30 · 8 · 1 / 1,000) (watt · day · hour · kW / day · watt)

= 14.4 kW·hour

Rounded to the nearest whole number:

14 kWh

7 0
2 years ago
Carbon dioxide is released when limestone is heated during the production of
Archy [21]

Answer:

Calcium

Explanation:

Because limestone is mainly calcium carbonate, CaCO3, which when heated breaks down to form calcium oxide and carbon dioxide.

6 0
2 years ago
Kate is working on a project in her tech education class. She plans to assemble a fan motor. Which form of energy does the motor
grin007 [14]

The job that the fan is designed and built to do is to convert the electrical energy it uses into the kinetic (motion) energy of moving air.

I can't really guarantee that it accomplishes that with MOST of the electrical energy it uses, because I don't know how efficient your fan is. For example, if it's a really old fan, and one blade has the end broken off, and a lot of dust and mosquitoes have gotten into the motor, and it shakes and vibrates and makes a lot of noise when it's running, then it's converting a lot of the electrical energy into thermal energy (it gets hot when it runs) and some into sound energy too.

If you can live without the word "most" in the question, then we can assume that the fan is well designed and running like a top, and the answer is definitely choice-B .

4 0
2 years ago
Other questions:
  • Iron(II) carbonate (FeCO3) has a solubility product constant of 3.13 x 10-11 . Calculate the molar solubility of FeCO3 in water
    11·1 answer
  • What size force does the femur exerts on the kneecap if the tendons are oriented as in the figure and the tension in each tendon
    15·1 answer
  • what shall be the effect on the least count of spherometer if number of divisions on its circular scale be doubled?
    12·1 answer
  • What is the potential energy of the two-spring system after the point of connection has been moved to position (x, y)? keep in m
    7·2 answers
  • What voltage is delivered to a 120-volt/5,000-watt load that is fed with #10 awg wire (1.24 ohms/1,000 feet) and located 750 fee
    8·1 answer
  • From the top of a bridge that is 50 m high, two boats can be seen anchored in a marina. One boat is anchored in the direction S2
    6·1 answer
  • If you wanted to find the area of the hot filament in a light bulb, you would have to know the temperature (determinable from th
    5·1 answer
  • A person weighs 150 pounds and the correct dosage of a drug is given as 1.50 \mg per kilogram of body weight. How many milligram
    9·1 answer
  • A 70kg man runs at a pace of 4 m/s and a 50g meteor travels at 2 km/s. Which has the most kinetic energy?.
    5·1 answer
  • a block weighing (Fg) 50 N is resting on a steel table (us = 0.74). The minimum force to start this block moving is what N
    8·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!