Answer:
So, we rely on radiometric dating to calculate their ages. Radiometric dating, or radioactive dating as it is sometimes called, is a method used to date rocks and other objects based on the known decay rate of radioactive isotopes.
Explanation:
radiometric dating is a very accurate way to date the Earth.We know it is accurate because radiometric dating is based on the radioactive decay of unstable isotopes. When an unstable Uranium (U) isotope decays, it turns into an isotope of the element Lead (Pb).
Answer:
As you haven't explained what measurements you took before solving this problem, I will explain the general procedure to evaluate the efficiency of a kettle. I hope it helps you. I´ll send an attachement file with the full answer, since I couldn't write it here.
I assume that the material that is going to be heated in the kettle is water.
1- You have to boil water in it and take the time it takes to its boiling point (in seconds).
2- You have to evaluate the amount of energy the water absorbed Q with the efficiency formula which I explain in the attachement file.
3- Divide Q by the time it took to bring the water to boiling so you can have the power it consumed.
4- You divide the last value you obtained by the Kettles's power rating.
5- Multiply the last value by 100 to obtain a percentage value of efficiency.
Explanation:
Efficiency is the ration of a machine's useful work, in this case how much energy the water absorbed to get to its boiling point divided by the time it took to get to this point, and the total energy expended, in this case the kettles's power rating.
Answer:
<u>1. Net ionic equation:</u>
- Cl⁻(aq) + Ag⁺(aq) → AgCl(s)
<u />
<u>2. Volume of 1.0M AgNO₃</u>
Explanation:
1. Net ionic equation for the reaction of NaCl with AgNO₃.
i) Molecular equation:
It is important to show the phases:
- (aq) for ions in aqueous solution
- (s) for solid compounds or elements
- (g) for gaseous compounds or elements
- NaCl(aq) + AgNO₃(aq) → AgCl(s) + NaNO₃(aq)
ii) Dissociation reactions:
Determine the ions formed:
- NaCl(aq) → Na⁺(aq) + Cl⁻(aq)
- AgNO₃(aq) → Ag⁺(aq) + NO₃⁻(aq)
- NaNO₃(aq) → Na⁺(aq) + NO₃⁻(aq)
iii) Total ionic equation:
Substitute the aqueous compounds with the ions determined above:
- Na⁺(aq) + Cl⁻(aq) + Ag⁺(aq) + NO₃⁻(aq) → AgCl(s) + Na⁺(aq) + NO₃⁻(aq)
iv) Net ionic equation
Remove the spectator ions:
- Cl⁻(aq) + Ag⁺(aq) → AgCl(s) ← answer
2. How many mL of 1.0 M AgNO₃ will be required to precipitate 5.84 g of AgCl
i) Determine the number of moles of AgNO₃
The reaction is 1 to 1: 1 mole of AgNO₃ produces 1 mol of AgCl
The number of moles of AgCl is determined using the molar mass:
- number of moles = mass in grams / molar mass
- molar mass of AgCl = 143.32g/mol
- number of moles = 5.84g / (143.32g/mol) = 0.040748 mol
ii) Determine the volume of AgNO₃
- molarity = number of moles of solute / volume of solution in liters
- V = 0.040748mol / (1.0M) = 0.040748 liter
- V = 0.040748liter × 1,000ml / liter = 40.748 ml
Round to two significant figures: 41ml ← answer
Answer:
-10778.95 J heat must be removed in order to form the ice at 15 °C.
Explanation:
Given data:
mass of steam = 25 g
Initial temperature = 118 °C
Final temperature = 15 °C
Heat released = ?
Solution:
Formula:
q = m . c . ΔT
we know that specific heat of water is 4.186 J/g.°C
ΔT = final temperature - initial temperature
ΔT = 15 °C - 118 °C
ΔT = -103 °C
now we will put the values in formula
q = m . c . ΔT
q = 25 g × 4.186 J/g.°C × -103 °C
q = -10778.95 J
so, -10778.95 J heat must be removed in order to form the ice at 15 °C.
Volume of tank =
(given)
Since,
So,

For
:

The significant rule for multiplication, states that the number of significant figures in the answer obtained by multiplication is determined by the value with the lowest number of significant digits.
Since, the minimum number of decimal places in the above multiplication operation is 1 so, the final result must be upto 1 decimal place only.

Hence, volume in
is 243.5.