answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
SashulF [63]
2 years ago
14

A hot air balloon is on the ground, 200 feet from an observer. The pilot decides to ascend at 100 ft/min. How fast is the angle

of elevation changing when the balloon is at an altitude of 2500 feet?
Physics
1 answer:
liq [111]2 years ago
6 0

Answer:

0.0031792338 rad/s

Explanation:

\theta = Angle of elevation

y = Height of balloon

Using trigonometry

tan\theta=y\dfrac{y}{200}\\\Rightarrow y=200tan\theta

Differentiating with respect to t we get

\dfrac{dy}{dt}=\dfrac{d}{dt}200tan\theta\\\Rightarrow \dfrac{dy}{dt}=200sec^2\theta\dfrac{d\theta}{dt}\\\Rightarrow 100=200sec^2\theta\dfrac{d\theta}{dt}\\\Rightarrow \dfrac{d\theta}{dt}=\dfrac{100}{200sec^2\theta}\\\Rightarrow \dfrac{d\theta}{dt}=\dfrac{1}{2}cos^2\theta

Now, with the base at 200 ft and height at 2500 ft

The hypotenuse is

h=\sqrt{200^2+2500^2}\\\Rightarrow h=2507.98\ ft

Now y = 2500 ft

cos\theta=\dfrac{200}{h}\\\Rightarrow cos\theta=\dfrac{200}{2507.98}=0.07974

\dfrac{d\theta}{dt}=\dfrac{1}{2}\times 0.07974^2\\\Rightarrow \dfrac{d\theta}{dt}=0.0031792338\ rad/s

The angle is changing at 0.0031792338 rad/s

You might be interested in
A 4.0 kg block is resting on a rough horizontal table. The coefficient of static friction us is 0.60. The static friction betwee
professor190 [17]

Answer: 24 N

Explanation:

Given that the

Mass m = 4 kg

Coefficient of friction (μ) = 0.60

To calculate the static friction between the block and the table before any attempted motion, you will use the formula; F = (μ)N

Where

F = static friction

N = normal reaction = mg

g = acceleration due to gravity = 9.8 m/^2

Substitutes m, g and (μ) into the formula

F = 0.6 × 4 × 9.8

F = 23.52 N

Therefore, the static friction between the block and the table before any attempted motion is 24 N approximately.

6 0
2 years ago
On average, both arms and hands together account for 13% of a person's mass, while the head is 7.0% and the trunk and legs accou
BabaBlast [244]

Answer:

<em>176.38 rpm</em>

<em></em>

Explanation:

mass percentage of arms and legs = 13%

mass percentage of legs and trunk = 80%

mass percentage of head = 7%

Total mass of the skater = 74.0 kg

length of arms = 70 cm = 0.7 m

height of skater = 1.8 m

diameter of trunk = 35 cm = 0.35 m

Initial angular momentum = 68 rpm

<em>We assume:</em>

  1. <em>The spinning skater with her arms outstretched as a vertical cylinder (head, trunk, and legs) with two solid uniform rods (arms and hands) extended horizontally.</em>
  2. <em>friction between the skater and the ice is negligible.</em>

We split her body into two systems, the spinning hands as spinning rods

1. Each rod has moment of inertia = \frac{1}{3} mL^{2}

mass m of the arms is 13% of 74 kg = 0.13 x 74 = 9.62 kg

mass of each side will be assumed to be 9.62/2 = 4.81 kg

L = length of each arm

therefore,

I =  \frac{1}{3} x 4.81 x 0.7^{2} = 0.79 kg-m   for each arm

2. Her body as a cylinder has moment of inertia =  \frac{1}{2} mr^{2}

r = radius of her body = diameter/2 = 0.35/2 = 0.175 m

mass of body trunk = (80% + 7%) of 74 kg = 0.87 x 74 = 64.38 kg

I = \frac{1}{2} x 64.38 x 0.175^{2} = 0.99 kg-m

We consider each case

case 1: Body spinning with arm outstretched

<em>Total moment of inertia = sum of moments of inertia of both arms and moment of inertia of body trunk</em>

I = (0.79 x 2) +  0.99 = 2.57 kg-m

angular momentum = Iω

where ω = angular speed = 68.0 rpm = \frac{2\pi }{60} x 68 = 7.12 rad/s

angular momentum = 2.57 x 7.12 = 18.29 kg-rad/m-s

case 2: Arms pulled down parallel to trunk

<em>The momentum of inertia will be due to her body trunk alone</em> which is 0.91 kg-m

angular momentum =  Iω

=  0.99 x ω = 0.91ω

<em>according to conservation of angular momentum, both angular momentum must be equal</em>, therefore,

18.29 = 0.99ω

ω = 18.29/0.99 = 18.47 rad/s

18.47 ÷ \frac{2\pi }{60}  = <em>176.38 rpm</em>

7 0
2 years ago
An airplane propeller rotates with an angular speed of 260 rad/s though what angul does the propeller rotate in 5.0s? Give your
ch4aika [34]

Answer:

1300 rad (74522^{\circ})

Explanation:

The angular speed of an object is the rate of change of angular position.

It is given by:

\omega=\frac{\theta}{t}

where

\omega is the angular speed

\theta is the angular displacement of the object

t is the time elapsed

For the propeller rotating in this problem, we have

\omega=260 rad/s is the angular speed

t = 5.0 s is the time elapsed

Therefore, the angular displacement is:

\theta=\omega t=(260)(5.0)=1300 rad

And since 2\pi rad = 360^{\circ}, the angle in degrees is

\theta=\frac{1300}{2\pi}(360)=74522^{\circ}

7 0
2 years ago
A 0.10 kg piece of copper at an initial temperature of 95°c is dropped into 0.20 kg of water contained in a 0.28 kg aluminum cal
DedPeter [7]
<span>(cp of Copper = 387J / kg times degrees C; cp of Aluminum = 899 J / kg times degrees C; cp of Water = 4186J / kg times degrees C)
</span> Use the law of conservation of energy and assuming no heat loss to the surroundings, then 
 <span>Heat given up by copper = heat absorbed by water + heat absorbed by calorimeter 
</span><span> Working formula is 
</span> <span>Q = heat = MCp(delta T) 
</span><span> where 
</span><span> M = mass of the substance 
</span><span> Cp = specific heat of the substance 
</span><span> delta T = change in temperature 
</span> Heat given up by copper = 0.10(387)(95 - T) 
<span> Heat absorbed by water = 0.20(4186)(T - 15) 
</span><span> Heat absorbed by calorimeter = 0.28(899)(T - 15) 
</span> where 
<span> T = final temperature of the system 
</span><span> Substituting appropriate values, 

</span> 0.10(387)(95 - T) = 0.20(4186)(T - 15) + 0.28(899)(T - 15) 
<span> 38.7(95 - T) = 1088.92(T - 15) 
</span><span> 3676.50 - 38.7T = 1088.92T - 16333.8 
 </span><span>1127.62T = 20010.3 
</span><span> T = 17.75 C </span>
8 0
2 years ago
A capacitor with plates separated by distance d is charged to a potential difference ΔVC. All wires and batteries are disconnect
fgiga [73]

Answer:

Yes, the capacitor's Q load varies inversely proportional to the distance between plates.

Explanation:

In the attached files you see the inverse relationship between capacity and distance between plates "d".

In the following formula we see its relationship with the "Q" load

5 0
2 years ago
Read 2 more answers
Other questions:
  • A taxi starts from Monument Circle and travels 5 kilometers to the east for 5 minutes. Then it travels 10 kilometers to the sout
    6·2 answers
  • A 0.5-kg ball accelerated at 50 m/s2<br> .<br><br> What force was applied?
    7·1 answer
  • Jane is a team leader. Match her leadership and teamwork skills to the appropriate descriptions.making her team understand the r
    6·1 answer
  • A standard 1 kilogram weight is a cylinder 51.0 mm in height and 42.0 mm in diameter. Determine the density of the material
    6·1 answer
  • A child's toy is suspended from the ceiling by means of a string. The Earth pulls downward on the toy with its weight force of 8
    5·1 answer
  • Suppose the rocket is coming in for a vertical landing at the surface of the earth. The captain adjusts the engine thrust so tha
    5·1 answer
  • series RC circuit is built with a 15 kΩ resistor and a parallel-plate capacitor with 18-cm-diameter electrodes. A 18 V, 36 kHz s
    11·1 answer
  • The air in a 6.00 L tank has a pressure of 2.00 atm. What is the final pressure, in atmospheres, when the air is placed in tanks
    9·1 answer
  • A light bulb in a battery powered desk lamp has a current of 0.042 A and is connected to a 9.2 V battery. What is the resistance
    9·2 answers
  • Three sticks are arranged in such a way that they form a right triangle. The
    8·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!