answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Tanya [424]
2 years ago
4

A trapezoidal plate with bases 4 m and 8 m is partially submerged vertically in water so that the top is 2 m above the surface a

nd the bottom is 2 m below the surface. Express the hydrostatic force against one side of the plate as an integral and evaluate it. (Round your answer to the nearest whole number. Use 9.8 m/s2 for the acceleration due to gravity. Recall that the weight density of water is 1000 kg/m3.)
Physics
1 answer:
Nesterboy [21]2 years ago
7 0

Answer:

F = 91466.667 N

Explanation:

Solution:-

- First you need to find an area equation for the triangle section of the trapezoid where the width is increasing from 4m to 8m, keeping in mind that we're only interested in the area that is submerged in water (2m).

- Set up the equation so that you divide the total height (4m) by the maximum width of this section (2m since (8m - 4m)/2, there's 2m on each side). This is equal to the line from the base to the surface of the water (2 - x) divided by a, which is the width at 2-x.

                                ( 2 - x ) / a = 4 / 2

                                a = ( 2 - x ) / 2

- Now we can find the area(A) of the trapezoid, which is the base added to double the width of the triangle (a), since the triangle is on both sides of the trapezoid. To find the area, we will multiply all of that by the change in height, which is Δx.

                               A = ( 4 + 2*a) * Δx

                               A = ( 4 + 2*((2 - x ) / 2)) * Δx

The force is calculated by taking the definite integral on the interval submerged in water of the pressure multiplied by gravity, the change in depth (2-x) and the area equation.

                              F=∫ p*g*(2−x). dA

Where, p : Density of water = 1000 kg/m^3

            g : gravitational acceleration = 9.8 m/s^2

- We calculate:

                             F = (9.8)*(1000) ∫ ( 2 - x ) * ( 10 - x ) / 2

- Set up limits from 0 - > 2. And Evaluate:

                             F = (9800)*(28/3)

                             F = 91466.667 N

                             

         

You might be interested in
Two objects are placed in thermal contact and are allowed to come to equilibrium in isolation. the heat capacity of object a is
Harman [31]
Given:
Ca = 3Cb                      (1)
where
Ca =  heat capacity of object A
Cb =  heat capacity f object B

Also,
Ta = 2Tb                     (2)
where
Ta = initial temperature of object A
Tb = initial temperature of object B.

Let
Tf =  final equilibrium temperature of both objects,
Ma = mass of object A,
Mb = mass of object B.

Assuming that all heat exchange occurs exclusively between the two objects, then energy balance requires that
Ma*Ca*(Ta - Tf) = Mb*Cb*(Tf - Tb)           (3)

Substitute (1) and (2) into (3).
Ma*(3Cb)*(2Tb - Tf) = Mb*Cb*(Tf - Tb)
3(Ma/Mb)*(2Tb - Tf) = Tf - Tb

Define k = Ma/Mb, the ratio f the masses.
Then
3k(2Tb - Tf) = Tf - Tb
Tf(1+3k) = Tb(1+6k)
Tf = [(1+6k)/(1+3k)]*Tb

Answer:
T_{f} =( \frac{1+6k}{1+3k} )T_{b}= \frac{1}{2}( \frac{1+6k}{1+3k})T_{a}
where
k= \frac{M_{a}}{M_{b}} 
7 0
2 years ago
Lilli suggests that they explore the simulation starting with varying only a single parameter in order to understand the role of
mrs_skeptik [129]

Answer:

B.

Explanation:

One of the ways to address this issue is through the options given by the statement. The concepts related to the continuity equation and the Bernoulli equation.

Through these two equations it is possible to observe the behavior of the fluid, specifically the velocity at a constant height.

By definition the equation of continuity is,

A_1V_1=A_2V_2

In the problem A_2 is 2A_1, then

A_1V_1=2A_1V_2

V_2 = \frac{V_1}{2}

<em>Here we can conclude that by means of the continuity when increasing the Area, a decrease will be obtained - in the diminished times in the area - in the speed.</em>

For the particular case of Bernoulli we have to

P_1 + \frac{1}{2}\rho V_1^2 = P_2 +\frac{1}{2}\rho V_2^2

P_2-P_1 = \frac{1}{2} \rho (V_1^2-V_2^2)

For the previous definition we can now replace,

P_2-P_1 = \frac{1}{2} \rho (V_1^2-(\frac{V_1}{2})^2)

\Delta P =  \frac{3}{8} \rho V_1^2

<em>Expressed from Bernoulli's equation we can identify that the greater the change that exists in pressure, fluid velocity will tend to decrease</em>

The correct answer is B: "If we increase A2 then by the continuity equation the speed of the fluid should decrease. Bernoulli's equation then shows that if the velocity of the fluid decreases (at constant height conditions) then the pressure of the fluid should increase"

4 0
2 years ago
A floating leaf oscillates up and down two complete cycles in one second as a water wave passes by. The wave's wavelength is 10
postnew [5]

Answer:

C) 20 m/s

Explanation:

Wave: A wave is a disturbance that travels through a medium and transfers energy from one point to another, without causing any permanent displacement of the medium itself. Examples of wave are, water wave, sound wave, light rays, radio waves. etc.

The velocity of a moving wave is

v = λf ............................ Equation 1

Where v = speed of the wave, λ = wave length, f = frequency of the wave.

Given: f = 2 Hz (two complete cycles in one seconds), λ = 10 meters

Substituting these values into equation 1

v = 2×10

v = 20 m/s.

Thus the speed of the wave = 20 m/s

The right option is C) 20 m/s

7 0
2 years ago
What is the torque τb about axis b due to the force f⃗ ? (b is the point at cartesian coordinates (0,b), located a distance b fr
yKpoI14uk [10]
Check the attached file for the solution.

8 0
2 years ago
A 1.25 in. by 3 in. rectangular steel bar is used as a diagonal tension member in a bridge truss. the diagonal member is 20 ft l
pentagon [3]

Answer:

axial stress in the diagonal bar =36,000 psi

Explanation:

Assuming we have to find axial stress

Given:

width of steel bar: 1.25 in.

height of the steel bar: 3 in

Length of the diagonal member = 20ft

modulus of elasticity E= 30,000,000 psi

strain in the diagonal member ε = 0.001200 in/in

Therefore, axial stress in the diagonal bar σ = E×ε

=  30,000,000 psi×  0.001200 in/in =36,000 psi

5 0
2 years ago
Other questions:
  • A vector A is added to B=6i-8j. The resultant vector is in the positive x direction and has a magnitude equal to A . What is the
    12·2 answers
  • In a simple electric circuit, ohm's law states that v=irv=ir, where vv is the voltage in volts, ii is the current in amperes, an
    15·1 answer
  • Which of the following best describes the dependant variable?
    13·1 answer
  • A dog runs 30 feet to the north then 5 feet to the south what is the displacement of the dog
    12·2 answers
  • A large ant is standing on the middle of a circus tightrope that is stretched with tension Ts. The rope has mass per unit length
    15·1 answer
  • A 25-turn circular coil of wire has diameter 1.00 m. It is placed with its axis along the direction of the Earth’s magnetic fiel
    10·1 answer
  • Thermodynamic Properties: Two identical, sealed, and well-insulated jars contain different gases at the same temperature. Each c
    12·1 answer
  • A vertical spring of constant k = 400 N/m hangs at rest. When a 2 kg mass is attached to it, and it is released, the spring exte
    6·1 answer
  • Natalia is studying a wave produced in her magnetics lab. This wave can move through the empty space in a vacuum and carries a l
    6·2 answers
  • An archer draws her bow and stores 34.8 J of elastic potential energy in the bow. She releases the 63 g arrow, giving it an init
    10·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!