Answer:
Option B is the correct answer.
Explanation:
Shear stress is the ratio of shear force to area.
We have
Shear stress = 3 N/mm² = 3 x 10⁶ N/m²
Area = Area of rectangle = 10 x 10⁻² x d = 0.1d
Shear force = 50000 N
Substituting
Width of beam = 16.67 cm
Option B is the correct answer.
Answer:
conserved
Explanation:
During this process the energy is conserved
As the question is about changing in frequency of a wave for an observer who is moving relative to the wave source, the concept that should come to our minds is "
Doppler's effect."
Now the general formula of the Doppler's effect is:
-- (A)
Note: We do not need to worry about the signs, as everything is moving towards each other. If something/somebody were moving away, we would have the negative sign. However, in this problem it is not the issue.
Where,
g = Speed of sound = 340m/s.
= Velocity of the receiver/observer relative to the medium = ?.
= Velocity of the source with respect to medium = 0 m/s.
= Frequency emitted from source = 400 Hz.
= Observed frequency = 408Hz.
Plug-in the above values in the equation (A), you would get:
Solving above would give you,
= 6.8 m/s
The correct answer = 6.8m/s
Answer:
51.2 mi/h
Explanation:
Total distance, d = 100 miles
First 60 miles with speed 55 mi/h
Next 40 miles with speed 75 mi/h
Time taken for first 60 miles, t1 = 60 / 55 = 1.09 h
Time taken for 40 miles, t2 = 40 / 75 = 0.533 h
Time spent to get stuck, t3 = 20 min = 0.33 h
Total time, t = t1 + t2 + t3 = 1.09 + 0.533 + 0.33 = 1.953 h
The average speed is defined as the ratio of total distance traveled to the total time taken.
Average speed = 
Thus, the average speed of the journey is 51.2 mi/h.
1. a. longitudinal waves.
There are two types of waves:
- Transverse waves: in transverse waves, the oscillations of the wave occur in a direction perpendicular to the direction of propagation of the wave
- Longitudinal waves: in longitudinal waves, the oscillations of the waves occur parallel to the direction in which the waves are travelling.
So, these types of waves are called longitudinal waves.
2. d. a medium
There are two types of waves:
- Electromagnetic waves: these waves are produced by the oscillations of electric and magnetic field, and they can travel both in a medium and also in a vacuum (they do not need a medium to propagate)
- Mechanical waves: these waves are produced by the oscillations of the particles in a medium, so they need a medium to propagate - therefore, the correct choice is d. a medium
3. a. AM/FM radio
Analogue signals consist of continuous signals, which vary in a continuous range of values. On the contrary, digital signals consist of discrete signals, which can assume only some discrete values. For AM and FM radios, signals are transmitted by using analogue signals.
