Answer:
People can capture geothermal energy through: Geothermal power plants, which use heat from deep inside the Earth to generate steam to make electricity. Geothermal heat pumps, which tap into heat close to the Earth's surface to heat water or provide heat for buildings
When the weather is cold, the water or refrigerant heats up as it travels through the part of the loop that's buried underground. Once it gets back above ground, the warmed water or refrigerant transfers heat into the building. The water or refrigerant cools down after its heat is transferred.
The area of the sprinkles can be determined through the area of a circle that is pi * r^2 in which the given dimensions above are the radii, r. The second scenarios radius is only half of the original, that is 4 ft. In this case, we can compute the area of the second again. We calculate next the difference of two areas of circles.
Answer:x=2 and x=3
Explanation:
Given
Potential Energy for a certain mass is
and we know force is given by
For Force to be zero F=0
Therefore at x=2 and x=3 Force on particle is zero.
Answer: The direction of the electric field, E→, is pointed in the +y direction.
Explanation:
One can use the right hand rule to illustrate the direction of travel of an electromagnetic and thereby get the directions of the electric field, magnetic field and direction of travel of the wave.
The right hand rule states that the direction of the thumb indicate the direction of travel of the electromagnetic wave (<em>in this case the -z direction</em>) and the curling of the fingers point in the direction of the magnetic field B→ (<em>in this case the +x direction</em>), therefore, the electric field direction E→ is in the direction of the fingers which would be pointed towards the +y direction.
Answer:
The value of tension on the cable T = 1065.6 N
Explanation:
Mass = 888 kg
Initial velocity ( u )= 0.8 
Final velocity ( V ) = 0
Distance traveled before come to rest = 0.2667 m
Now use third law of motion 
= 
- 2 a s
Put all the values in above formula we get,
⇒ 0 = 
- 2 × a ×0.2667
⇒ a = 1.2 
This is the deceleration of the box.
Tension in the cable is given by T = F = m × a
Put all the values in above formula we get,
T = 888 × 1.2
T = 1065.6 N
This is the value of tension on the cable.
