The correct option is C. The amount of MgCl2. we know this because <span>no matter how much you increase KOH, if you dont increase Mgcl2, the amount of Mg(OH)2 remains the same. Hope this works for you</span>
Answer:
(A) The work done by the system is -101.325J
(B) The workdone by the system is -90.75J
Explanation:
(A) Workdone = -PΔV
Given that A = 100cm2 = 0.01m2
distance d = 10cm = 0.1m
ΔV= Area × distance
ΔV= 0.01 ×0.1
ΔV = 0.001m3
P= external pressure = 1atm = 101325Pa
Workdone = -0.001 × 101325
W= - 101.325Pa m3
1Pam3 = 1J
Therefore W = - 101.325J
The work done on the system is -101.325J
(B) Workdone = -PΔV
Given that A = 50cm2 = 0.005m2
distance d = 15cm = 0.15m
ΔV= Area × distance
ΔV= 0.005×0.15
ΔV = 0.00075m3
P=121kPa = 121000Pa
W= - 121000 × 0.00075
W= -90.75Pa m3
1Pam3 = 1J
W = - 90.75J
The woekdone by the system is -90.75J
Answer:
i believe that 14 at a higher rate is the answer
Explanation:
The characteristics of an Arrhenius acid was the acid donates H+ when it is in the aqueous solution, whether the solution is acid or base. If the solution is a acid, then be H+ builds up and increase its thing. The pH level for acid solution is the scale from 1-6. Even though the ph scale is lower than the base, the color also varies. It also applies to the base, too.
