The relationship between resistance R and resistivity
is
where L is the length of the wire and A its cross section.
The radius of the wire is half the diameter:
and the cross section is
From the first equation, we can then find the length of the wire when
(copper resistivity:
)
Answer:
I am not a driver, but I think it's C.
Explanation:
Hello.
The formula for Power is Work divided by Time; however, we do not have our value for Work - yet.
To find for the Work inputted, we need to use its formula: Force * Distance.
Let's multiply our Force by our Distance. Remember that our Force is always measured in Newtons (N), and our Distance is measured by Meters (M).
35,000 * 25 = 875,000 J (Unit for Work is "J" or "Joules")
Now that we have the value for Work, let's apply it to our Power formula.
P = 875,000 / 45; 19,444.44~
The Power required to lift the girder is 1944.44~ W (Unit for Power is "W" or "Watts").
I hope this helps!
Answer: The spring of the spring is 25 N/m.
Explanation:
Mass of the body = 25 g= 0.025 kg (1 kg = 1000 g)
Oscillation is 4 sec = 20
Oscillation in 1 sec =
Frequency of the vibration of the spring = 
Force constant can be calculated bu using the relation between the frequency and, mass and spring constant 'k'
The spring of the spring is 25 N/m.
