Ask question

Ask question

All categories

elena-14-01-66 [18.8K]

2 years ago

9

A spherical bowling ball with mass m = 4.1 kg and radius R = 0.117 m is thrown down the lane with an initial speed of v = 8.9 m/

s. The coefficient of kinetic friction between the sliding ball and the ground is ? = 0.25. Once the ball begins to roll without slipping it moves with a constant velocity down the lane.
1.What is the magnitude of the angular acceleration of the bowling ball as it slides down the lane?

2.What is magnitude of the linear acceleration of the bowling ball as it slides down the lane?

3.How long does it take the bowling ball to begin rolling without slipping?
4.How far does the bowling ball slide before it begins to roll without slipping?
5.What is the magnitude of the final velocity?
After the bowling ball begins to roll without slipping, compare the rotational and translational kinetic energy of the bowling ball:
KErot< KEtran
KErot= KEtran
KErot> KEtran

1 answer:

Furkat [3]2 years ago

6 0

Answer:

1) 23.45 rad/s²

2) 2.7 m/s²

3) t= 1.6 s

4) x ≈ 11 m

5) vfinal = 4.45 m/s

6) KErot = 16.2 J

KEtran = 41 J

KErot < KEtran

Explanation:

Step 1: Data given

mass bowling ball = 4.1 kg

radius = 0.117 meter

initial speed = 8.9 m/s

1) What is the magnitude of the angular acceleration of the bowling ball as it slides down the lane?

α = a / r = 2.774 m/s² / 0.117m = 23.45 rad/s²

2)What is magnitude of the linear acceleration of the bowling ball as it slides down the lane?

a = µ*g = 0.28 * 9.8m/s² = 2.744 m/s² ≈ 2.7 m/s²

3) How long does it take the bowling ball to begin rolling without slipping?

This begins when ω = v / r

with

⇒ ω = α*t = 23.45 rad/s² * t

⇒ v = Vo - a*t = 8.9m/s - 2.744m/s²*t

This gives us:

23.45rad/s² * t = (8.9m/s - 2.744m/s²*t) / 0.11m

2.744*t = 8.9 - 2.744*t

t = 8.9 / 5.488 = 1.622 s ≈ 1.6 s

4) How far does the bowling ball slide before it begins to roll without slipping?

x = Vo*t - ½at² = (8.9*1.622 - ½*2.744*(1.622)²) m = 10.82 m ≈ 11 m

5) What is the magnitude of the final velocity?

v = Vo - at = 8.9m/s - 2.744m/s² * 1.622s = 4.45 m/s

6) After the bowling ball begins to roll without slipping, compare the rotational and translational kinetic energy of the bowling ball:

trans KE = ½ * 4.1kg * (4.45m/s)² =40.595 J ≈ 41 J

I = (2/5)mr² = (2/5) * 4.1kg * (0.117m)² = 0.0224 kg·m²

ω = v/r = 4.45m/s / 0.117m = 38.03 rad/s, so

rot KE = ½Iω² = ½ * 0.0224kg·m² * (38.03rad/s)² = 16.2 J

16.2 J < 41 J

KErot < KEtran

(For a rolling solid sphere, KErot ≈ 2/5 * KEtran)

You might be interested in

The chemical formula for water, H2O, means that each water molecule contains

Ainat [17]

The chemical formula for water, H2o means that each water molecule contains one oxygen atom and two hydrogen atoms. This is the formula for water which has a liquid form, a solid form as ice, and also a gaseous form as water vapor.

5 0

2 years ago

Read 2 more answers

The maximum tension that a 0.80 m string can tolerate is 15 N. A 0.35-kg ball attached to this string is being whirled in a vert

zimovet [89]

Answer:

v=5.86 m/s

Explanation:

Given that,

Length of the string, l = 0.8 m

Maximum tension tolerated by the string, F = 15 N

Mass of the ball, m = 0.35 kg

We need to find the maximum speed the ball can have at the top of the circle. The ball is moving under the action of the centripetal force. The length of the string will be the radius of the circular path. The centripetal force is given by the relation as follows :

$F=\dfrac{mv^2}{r}$

v is the maximum speed

$v=\sqrt{\dfrac{Fr}{m}} \\\\v=\sqrt{\dfrac{15\times 0.8}{0.35}} \\\\v=5.86\ m/s$

Hence, the maximum speed of the ball is 5.86 m/s.

3 0

2 years ago

g A projectile is launched with speed v0 from point A. Determine the launch angle ! which results in the maximum range R up the

Svetlanka [38]

Answer:

The range is maximum when the angle of projection is 45 degree.

Explanation:

The formula for the horizontal range of the projectile is given by

$R = \frac{u^{2}Sin2\theta }{g}$

The range should be maximum if the value of Sin2θ is maximum.

The maximum value of Sin2θ is 1.

It means 2θ = 90

θ = 45

Thus, the range is maximum when the angle of projection is 45 degree.

If the angle of projection is 0 degree

R = 0

It means the horizontal distance covered by the projectile is zero, it can move in vertical direction.

If the angle of projection is 30 degree.

$R = \frac{u^{2}Sin60 }{9.8}$

R = 0.088u^2

If the angle of projection is 45 degree.

$R = \frac{u^{2}Sin90 }{g}$

R = u^2 / g

5 0

2 years ago

Two wires are stretched between two fixed supports and have the same length. One wire A there is a second-harmonic standing wave

lina2011 [118]

(a) Greater

The frequency of the nth-harmonic on a string is an integer multiple of the fundamental frequency, $f_1$ :

$f_n = n f_1$

So we have:

- On wire A, the second-harmonic has frequency of $f_2 = 660 Hz$ , so the fundamental frequency is:

$f_1 = \frac{f_2}{2}=\frac{660 Hz}{2}=330 Hz$

- On wire B, the third-harmonic has frequency of $f_3 = 660 Hz$ , so the fundamental frequency is

$f_1 = \frac{f_3}{3}=\frac{660 Hz}{3}=220 Hz$

So, the fundamental frequency of wire A is greater than the fundamental frequency of wire B.

(b) $f_1 = \frac{v}{2L}$

For standing waves on a string, the fundamental frequency is given by the formula:

$f_1 = \frac{v}{2L}$

where

v is the speed at which the waves travel back and forth on the wire

L is the length of the string

(c) Greater speed on wire A

We can solve the formula of the fundamental frequency for v, the speed of the wave:

$v=2Lf_1$

We know that the two wires have same length L. For wire A, $f_1 = 330 Hz$ , while for wave B, $f_B = 220 Hz$ , so we can write the ratio between the speeds of the waves in the two wires:

$\frac{v_A}{v_B}=\frac{2L(330 Hz)}{2L(220 Hz)}=\frac{3}{2}$

So, the waves travel faster on wire A.

7 0

2 years ago

14 gauge copper wire has a diameter of 1.6 mm. what length of this wire has a resistance of 4.8ω?

Vladimir79 [104]

The relationship between resistance R and resistivity $\rho$ is
$R= \frac{\rho L}{A}$
where L is the length of the wire and A its cross section.

The radius of the wire is half the diameter:
$r= \frac{d}{2}= \frac{1.6 mm}{2}=0.8 mm=8\cdot 10^{-4} m$
and the cross section is
$A=\pi r^2 = \pi (8\cdot 10^{-4} m)^2=2.01\cdot 10^{-6} m^2$

From the first equation, we can then find the length of the wire when $R=4.8 \Omega$ (copper resistivity: $\rho = 1.724 \cdot 10^{-8} \Omega m$ )
$L= \frac{AR}{\rho}= \frac{(2.01\cdot 10^{-6} m^2)(1.724 \cdot 10^{-8} \Omega m)}{4.8 \Omega}=7.21 \cdot 10^{-15} m$

4 0

2 years ago