An ideal solenoid 20 cm long is wound with 5000 turns of very thin wire. What strength magnetic field is produced at the center
1 answer:
You might be interested in
Answer:
See the explanation below
Explanation:
To better understand this problem, a cylinder sketch is attached before and after the cut, we see that after the cut, the shape of this resembles that of a right triangle.
We can find, the centroid in the xy plane, knowing that the centroid for a triangle is located a third of its base.
In the z axis there is no displacement of the centroid.
The question is missing the diagram. Also, the choices must have pictorial representation. So, I have attached the missing diagram and the pictorial representation of the vectors.
Answer:
The correct representation is attached below. Force and acceleration will be towards the center of rotation while the velocity will be along the tangent to the circular motion. <u>Option (D).</u>
Explanation:
From the figure, we can conclude the following points:
1. The cylinder is under a uniform circular motion as the circular table is moving at constant speed.
2. For a circular motion, velocity acts along the tangent to the circular path.
3. For a circular motion, centripetal force acts on the body that causes it move around a circular path.
4 The direction of the centripetal force is radially inward towards the center of rotation.
5. The centripetal force causes a centripetal acceleration acting on the body.
6. From Newton's second law, the net acceleration of a body is in the same direction as that of the net force acting on it. So, centripetal acceleration also acts in the radially inward direction.
Therefore, from the above conclusions, it is clear that velocity will act in the horizontal direction at the given instance of time and force and acceleration will act vertically down for the given instance.
This is shown in the picture below. The option (D).
