Answer:
Explained
Explanation:
Two pieces of the same metal can have different recrystallization temperatures if the pieces have been cold worked to different amounts. The piece of work cold worked to greater extend will have more internal energy to drive the recrystalline process and lower recrystallization temperature.
Yes, its possible that recrystallization to take place in some regions of a part before it does in other regions of the same part if the work has been unevenly strained or if the part have different thickness at different sections.
<span>Answer:
For a disc, the moment of inertia about the perpendicular axis through the center is given by 0.5MR^2.
where M is the mass of the disc and R is the radius of the disc.
For the axis through the edge, use parallel axis theorem.
I = I(axis through center of mass) + M(distance between the axes)^2
= 0.5MR^2 + MR^2 (since the axis through center of mass is the axis through the center)
= 1.5 MR^2</span>
Answer:
a) E=228391.8 N/C
b) E=-59345.91N/C
Explanation:
You can use Gauss law to find the net electric field produced by both line of charges.

Where E1 and E2 are the electric field generated at a distance of r1 and r2 respectively from the line of charges.
The net electric field at point r will be:

a) for y=0.200m, r1=0.200m and r2=0.200m:
![E=\frac{1}{2\pi(8.85*10^{-12}C^2/Nm^2)}[\frac{4.80*10^{-6}C}{0.200m}-\frac{2.26*10^{-6}C}{0.200m}}]=228391.8N/C](https://tex.z-dn.net/?f=E%3D%5Cfrac%7B1%7D%7B2%5Cpi%288.85%2A10%5E%7B-12%7DC%5E2%2FNm%5E2%29%7D%5B%5Cfrac%7B4.80%2A10%5E%7B-6%7DC%7D%7B0.200m%7D-%5Cfrac%7B2.26%2A10%5E%7B-6%7DC%7D%7B0.200m%7D%7D%5D%3D228391.8N%2FC)
b) for y=0.600m, r1=0.600m, r2=0.200m:
![E=\frac{1}{2\pi(8.85*10^{-12}C^2/Nm^2)}[\frac{4.80*10^{-6}C}{0.600m}-\frac{2.26*10^{-6}C}{0.200m}}]=-59345.91N/C](https://tex.z-dn.net/?f=E%3D%5Cfrac%7B1%7D%7B2%5Cpi%288.85%2A10%5E%7B-12%7DC%5E2%2FNm%5E2%29%7D%5B%5Cfrac%7B4.80%2A10%5E%7B-6%7DC%7D%7B0.600m%7D-%5Cfrac%7B2.26%2A10%5E%7B-6%7DC%7D%7B0.200m%7D%7D%5D%3D-59345.91N%2FC)
Answer:
The force of the car engine.
Explanation:
The work- energy theorem states that the work done on an object is equal to the change in its kinetic energy. Its expression is given by :

Also, W = F.d
Where
F is the force applied by the engine of car
d is the displacement
m is the mass of an object
u is the initial speed
v is the final speed
So, the force of the car engine increased the car’s kinetic energy. Hence, this is the required solution.