answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Dmitrij [34]
2 years ago
14

A rocket moves upward, starting from rest with an acceleration of +29.4 for 3.98 s. it runs out of fuel at the end of the 3.98 s

but does not stop. m/s2 how high does it rise above the ground?
Physics
2 answers:
frez [133]2 years ago
7 0

consider the motion of rocket until it runs out of fuel

v₀ = initial velocity = 0 m/s

v = final velocity when it runs out of fuel = ?

t = time after which fuel is finished = 3.98 sec

a = acceleration = 29.4 m/s²

Y₀ = height gained when the fuel is finished = ?

using the kinematics equation

v = v₀ + a t

v = 0 + (29.4) (3.98)

v = 117.01 m/s


using the equation

v² = v²₀ + 2 a Y₀

(117.01)² = 0² + 2 (29.4) Y₀

Y₀ = 232.85 m


consider the motion of rocket after fuel is finished till it reach the maximum height.

Y₀ = initial position = 232.85 m

Y = final position at maximum height

v₀ = initial velocity just after the fuel is finished = 117.01 m/s

v = final velocity after it reach the maximum height = 0 m/s

a = acceleration due to gravity = - 9.8 m/s²

using the kinematics equation

v² = v²₀ + 2 a (Y - Y₀)

inserting the values

0² = (117.01)² + 2 (- 9.8) (Y - 232.85)

Y = 931.4 m

topjm [15]2 years ago
6 0
U = 0, initial upward speed
a = 29.4 m/s², acceleration up to 3.98 s
a = -9.8 m/s², acceleration after 3.98s

Let h₁ =  the height at time t, for t ≤ 3.98 s
Let h₂ =  the height at time t > 3.98 s

Motion for  t ≤ 3.98 s:
h₁ = (1/2)*(29.4 m/s²)*(3.98 s)² = 232.854 m
Calculate the upward velocity at t = 3.98 s
v₁ = (29.4 m/s²)*(3.98 s) = 117.012 m/s

Motion for t  > 3.98 s
At maximum height, the upward velocity is zero.
Calculate the extra distance traveled before the velocity is zero.
(117.012 m/s)² + 2*(-9.8 m/s²)*(h₂ m) = 0
h₂ = 698.562 m

The total height is
h₁ + h₂ = 232.854 + 698.562 = 931.416 m

Answer: 931.4 m (nearest tenth)

You might be interested in
Imagine that the satellite described in the problem introduction is used to transmit television signals. You have a satellite TV
Korolek [52]

Complete Question

A satellite in geostationary orbit is used to transmit data via electromagnetic radiation. The satellite is at a height of 35,000 km above the surface of the earth, and we assume it has an isotropic power output of 1 kW (although, in practice, satellite antennas transmit signals that are less powerful but more directional).

Imagine that the satellite described in the problem introduction is used to transmit television signals. You have a satellite TV reciever consisting of a circular dish of radius R which focuses the electromagnetic energy incident from the satellite onto a receiver which has a surface area of 5 cm2.

How large does the radius R of the dish have to be to achieve an electric field vector amplitude of 0.1 mV/m at the receiver?

For simplicity, assume that your house is located directly beneath the satellite (i.e. the situation you calculated in the first part), that the dish reflects all of the incident signal onto the receiver, and that there are no losses associated with the reception process. The dish has a curvature, but the radius R refers to the projection of the dish into the plane perpendicular to the direction of the incoming signal.

Give your answer in centimeters, to two significant figures.

Answer:

 The radius  of  the dish is R = 18cm

Explanation:

  From the question we are told that

     The radius of the orbit is  = R = 35,000km = 35,000 *10^3 m

    The power output of the power is  P = 1 kW = 1000W

   The electric vector amplitude is given as E = 0.1 mV/m = 0.1 *10^{-3}V/m

    The area of thereciever  is   A_R = 5cm^2

Generally the intensity of the dish is mathematically represented as

         I = \frac{P}{A}

Where A is the area orbit which is a sphere so this is obtained as

          A = 4 \pi r^2

              = (4 * 3.142 * (35,000 *10^3)^2)

              =1.5395*10^{16} m^2

  Then substituting into the equation for intensity

          I_s  =  \frac{1000}{1.5395*10^{16}}

            = 6.5*10^ {-14}W/m2

 Now the intensity received by the dish can be mathematically evaluated as

              I_d = \frac{1}{2}  * c \epsilon_o E_D ^2

  Where c is thesped of light with a constant value  c = 3.0*10^8 m/s

              \epsilon_o is the permitivity of free space  with a value  8.85*10^{-12} N/m

              E_D is the electric filed on the dish

So  since we are to assume to loss then the intensity of the satellite is equal to the intensity incident on the receiver dish

      Now making the eletric field intensity the subject of the formula

                  E_D = \sqrt{\frac{2 * I_d}{c * \epsilon_o} }

substituting values

                 E_D = \sqrt{\frac{2 * 6.5*10^{-14}}{3.0*10^{8} * 8.85*10^{-12}} }

                       = 7*10^{-6} V/m

The incident power on the dish is what is been reflected to the receiver

                P_D = P_R

Where P_D is the power incident on the dish which is mathematically represented as

              P_D = I_d A_d

                   = \frac{1}{2}  c \epsilon_o E_D^2  (\pi R^2)

And  P_R is the power incident on the dish which is mathematically represented as

                 P_R = I_R A_R

                       = \frac{1}{2} c \epsilon_o E_R^2 A_R

Now equating the two

                \frac{1}{2}  c \epsilon_o E_D^2  (\pi R^2) =  \frac{1}{2} c \epsilon_o E_R^2 A_R

   Making R the subject we have

                   R = \sqrt{\frac{E_R^2 A_R}{\pi E_D^2} }

Substituting values

                   R = \sqrt{\frac{(0.1 *10^{-3})^2 * 5}{\pi (7*10^{-6})^ 2} }

                     R = 18cm

8 0
2 years ago
At room temperature what is the strength of the electric field in a 12-gauge copper wire (diameter 2.05 mm that is needed to cau
Dima020 [189]
Electric field strength = resistivity of copper x current density
where
p= 1.72 x 10^-8 <span>ohm meter
diameter = 2.05mm=.00205 m
current = 2.75 A
</span>get first the current density:
current density = current/ cross section area
find the cross section area
cross section area = pi.(d/2)^2;  
cross section = 3.3 006x10-6 m^2
substitute the values 
current density = 2.75A/3.3006x 10-6m^2
current density=35.55 x1 0^2 A/m^2
Electric field stregnth =1.72 x 10^-8 ohm meter x 35.55 x10^2 A/m^2
Electric field stregnth= 46.415 Volts/m

The electric field strength of copper is 46.415 V/m.


6 0
2 years ago
Capillary action in trees can transport water from the roots to the tree's branches. The capillaries (Xyelem) in a certain tree
lesantik [10]

Answer:

h=14.2857\,m

Explanation:

Given:

radius of capillary, r=10^{-6}\,m

angle of contact, \theta=0^{\circ}

density of water, \rho=1000\,kg.m^{-3}

surface tension of water, T=0.07 \,N.m^{-1}

height, h = ?

We have the equation for the height of meniscus as:

h=\frac{2T.cos\, \theta}{\rho.g.r}

h=\frac{2\times 0.07\times cos\,0^{\circ}}{1000\times 9.8\times 10^{-6}}

h=14.2857\,m

No, the capillary action alone cannot be the mechanism of water transportation to the top of the trees. Transpiration also creates a suction pressure in the xylem complementary to the ascent of sap and cohesion of water being the other causes of movement of water up in the plants.

6 0
2 years ago
Consider two capacitors with unequal capacitance connected in parallel to a battery. Which of the following statements are true?
Allisa [31]

Answer:

  1. The equivalent capacitance of the combination is greater than the capacitance of either of the capacitors.
  2. The voltage across each of the capacitors is the same.
  3. The sum of the charge stored on each capacitor is equal to the charge supplied by the battery.

Explanation:

The capacitance connected in parallel will have the same potentials across its ends. If the battery has a charge Q, it is divided among the capacitors.

That is,

                      Q = q₁ + q₂ + q₃

But, the potential is shared equally as V. So, the individual capacitance of the equation has the form q₁ = C₁V , q₂ = C₂V, etc.

                   

So, in this case, when the effective capacitance is formulated, it would be

                          C = C₁ + C₂ + C₃     farad

Therefore, the true statements are

The equivalent capacitance of the combination is greater than the capacitance of either of the capacitors.

The potential across each of the capacitors is the same.

The charge supplied by the battery divided among the capacitors.

3 0
2 years ago
Some vehicles, like _____, have different rules for registration and renewal. A. trailers B. coupes C. sedans D. pickup trucks
ycow [4]

Answer:

trailers

Explanation:

7 0
2 years ago
Other questions:
  • A hot–air balloon is moving at a speed of 10 meters/second in the +x–direction. The balloonist throws a brass ball in the +x–dir
    14·1 answer
  • true or false:acceleration toward the center of a curved or circular path is called gravitational acceleration.
    13·1 answer
  • What units are given to the right of the equals sign
    10·1 answer
  • A capacitor with plates separated by distance d is charged to a potential difference ΔVC. All wires and batteries are disconnect
    13·2 answers
  • you want to compare brands of paper towels to see which holds the most liquid. the independent variable in your experiment would
    15·1 answer
  • A short current element dl⃗ = (0.500 mm)j^ carries a current of 5.40 A in the same direction as dl⃗ . Point P is located at r⃗ =
    15·1 answer
  • Consider the two moving boxcars in Example 5. Car 1 has a mass of m1 = 65000 kg and a velocity of v01 = +0.80 m/s. Car 2 has a m
    8·1 answer
  • A lamp uses a 230 V mains supply and transfers 96 J of energy every second. Work out the current through the lamp. Give your ans
    10·1 answer
  • Tech A says that some electric actuators are positioned by an A/C ECU which checks the air flow with sensors. Tech B says that e
    12·1 answer
  • Intensity: Radiation of a single frequency reaches the upper atmosphere of the earth with an intensity of 1350 W/m2. What is the
    8·1 answer
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!