answer.
Ask question
Login Signup
Ask question
All categories
  • English
  • Mathematics
  • Social Studies
  • Business
  • History
  • Health
  • Geography
  • Biology
  • Physics
  • Chemistry
  • Computers and Technology
  • Arts
  • World Languages
  • Spanish
  • French
  • German
  • Advanced Placement (AP)
  • SAT
  • Medicine
  • Law
  • Engineering
Dvinal [7]
2 years ago
3

A battery applies 45 volts to a circuit, while an ammeter reads 10 ma. later, the ammeter reading drops to 7 ma. assuming the re

sistance has not changed, the voltage must have
Physics
2 answers:
Kruka [31]2 years ago
7 0

This can be computed using Ohm's law relates the voltage, current and resistance using the following relation:

V = I * R

Where:

V is the applied voltage

I is the current

R is the resistance

We can say that the voltage and current are straight related to each other supposing there is continuous resistance. Meaning that when the current decreases, the voltage must have decreased as well.

 

So let us calculate the new voltage:

Voltage = 45 volts

Current = 10 ma = 10*10^-3 ampere

Substituting in the above relation:

V = IR

R = V/I = 45/10*10^-3 4500 Ω

Well along, the current released to 7*10^-3 ampere and the resistance is reserved the same.

 

So using the old equation: V = IR = 7*10^-3 * 4500 = 31.5 volts

Therefore, the voltage decreases as the current decreases.

velikii [3]2 years ago
5 0
Ohm's law relates the voltage, current and resistance using the following relation:
V = I*R
where:
V is the applied voltage
I is the current
R is the resistance
From this relation, we can note that the voltage and current are directly related to each other assuming constant resistance.
This means that when the current decreases, the voltage must have decreased as well.

Now, if we want to calculate the value of the new voltage, we can follow the following steps:
We are first given that:
Voltage = 45 volts
Current = 10 ma = 10*10^-3 ampere
Substituting in the above relation:
V = IR
R = V/I = 45/10*10^-3 4500 Ω
Later, the current dropped to 7*10^-3 ampere and the resistance is kept the same.
We will again substitute in the above equation to get the value of the new voltage as follows:
V = IR = 7*10^-3 * 4500 = 31.5 volts

Based on the calculations, our conclusion that the voltage will decrease as the current decreases is verified.
You might be interested in
Water runs through a plumbing with a flow of 0.750m3/s and arrives to every exit of a fountain. At what speed will the water com
Lubov Fominskaja [6]

Divide the flow rate (0.750 m³/s) by the cross-sectional area of each pipe:

diameter = 40 mm   ==>   area = <em>π</em> (0.04 m)² ≈ 0.00503 m²

diameter = 120 mm   ==>   area = <em>π</em> (0.12 m)² ≈ 0.0452 m²

Then the speed at the end of the 40 mm pipe is

(0.750 m³/s) / (0.00503 m²) ≈ 149.208 m/s ≈ 149 m/s

(0.750 m³/s) / (0.0452 m²) ≈ 16.579 m/s ≈ 16.6 m/s

7 0
1 year ago
A tank contains 100 gal of water and 50 oz of salt.water containing a salt concentration of 1 4 (1 1 2 sin t) oz/gal flows into
Alchen [17]

Answer:

Explanation:

Heres the possible full question and solution:

A tank contains 100 gal of water and 50 oz of salt. Water containing a salt concentration of ¼ (1 + ½ sin t) oz/gal flows ito the tank at a rate of 2 gal/min, and the mixture in the tank flows out at the same rate.

a. Find the amount of salt in the tank at any time.

b. Plot the solution for a time period long enough so that you see the ultimate behavior of the graph.

c. The long-time behavior of the solution is an oscillation about a certain constant level. What is this level? What is the amplitude of the oscillation?

solution

a)

Consider the tank contains 100gal of water and 50 oz of salt

Assume that the amount of salt in the tank at time t is Q(t).

Then, the rate of change of salt in the tank is given by \frac{dQ}{dt}.

Here, \frac{dQ}{dt}=rate of liquid flowing in the tank - rate of liquid flowing out.

Therefore,

Rate_{in} =2gal/min \times \frac{1}{4} (1+ \frac{1}{2}sin t)oz/gal\\\\\\ \frac{1}{2} (1+ \frac{1}{2}sin t)oz/min\\\\\\Rate_{out}=2gal/min \times\frac{Q}{100}oz/gal\\\\\frac{Q}{50}oz/min

Therefore,

\frac{dQ}{dt} can be evaluated as shown below:

\frac{dQ}{dt}=\frac{1}{2}(1+\frac{1}{2}\sin t)-\frac{Q}{50}\\\\\\\frac{dQ}{dt}+\frac{1}{50}Q=\frac{1}{2}+\frac{1}{4}\sin t

The above differential equation is in standard form:

\frac{dy}{dt}+Py=G

Here, P=\frac{1}{50},G=\frac{1}{2}+\frac{1}{4}\sin t

The integrating factor is as follows:

\mu(t)=e^{\int {P}dt}\\\mu(t)=e^{\int {\frac{1}{50}}dt}\\\mu(t)=e^{\frac{t}{50}}

Thus, the integrating factor is  \mu(t)=e^{\frac{t}{50}}

Therefore, the general solution is as follows:

y\mu(t)=\int {\mu (t)G}dt\\\\Qe^{\frac{t}{50}}=\int {e^{\frac{t}{50}}(\frac{1}{2}+\frac{1}{4}\sin t) dt}\\\\Qe^{\frac{t}{50}}=\frac{1}{2}\int {e^{\frac{t}{50}}dt + \frac{1}{4}\int {\sin t {e^{\frac{t}{50}}} dt}\\\\\Qe^{\frac{t}{50}}=25 {e^{\frac{t}{50}} + \frac{1}{4}\int {\sin t {e^{\frac{t}{50}}} dt}+C...(1)

Here, C is arbitrary constant of integration.

Solve \int {\sin te^{\frac{t}{50}}} dt}

Here u = e^{\frac{t}{50}} and v =\sin t.

Substitute u , v in the below formula:

\int{u,v}dt=u\int{v}dt-\int\frac{du}{dt}\int{v}dt\dot dt\\\\\int {e^{\frac{t}{50}}\sin t}dt=-e^{\frac{t}{50}}\cos t + \frac{1}{50}\int{e^{\frac{t}{50}}\cos t}dt...(2)

Now, take u = e^{\frac{t}{50}}, v =\sin t

Therefore, \int{e^{\frac{t}{50}}\cos t} dt=\int {e^{\frac{t}{50}}\sin t}dt - \frac{1}{50}\int{e^{\frac{t}{50}}\sin t}dt...(3)

Use (3) in equation(2)

\int {e^{\frac{t}{50}}\sin t}dt=-e^{\frac{t}{50}}\cos t + \frac{e^{\frac{t}{50}}}{50}\sin t - \frac{1}{2500}\int{e^{\frac{t}{50}}\sin t}dt\\\\\frac{2501}{2500}\int{e^{\frac{t}{50}}\sin t}dt={e^{\frac{t}{50}}\cos t}+\frac{e^{\frac{t}{50}}}{50}\sin t\\\\\int{e^{\frac{t}{50}}\sin t}dt=\frac{2500}{2501}{e^{\frac{t}{50}}\cos t}+\frac{50}{2501}e^{\frac{t}{50}}\sin t...(4)

Use (4) in equation(l) .

Qe^{\frac{t}{50}}=25 e^{\frac{t}{50}} - \frac{625}{2501}e^{\frac{t}{50}}\cos t +\frac{25}{5002}e^{\frac{t}{50}}\sin t+C

Apply the initial conditions t =0, Q = 50.

50=25-\frac{625}{2501}+c\\\\c=\frac{63150}{2501}

So, Qe^{\frac{t}{50}}=25 e^{\frac{t}{50}} - \frac{625}{2501}e^{\frac{t}{50}}\cos t +\frac{25}{5002}e^{\frac{t}{50}}\sin t+\frac{63150}{2501}

Therefore, the amount of salt in the tank at any time is as follows:

Qe^{\frac{t}{50}}=25 e^{\frac{t}{50}} - \frac{625}{2501}e^{\frac{t}{50}}\cos t +\frac{25}{5002}e^{\frac{t}{50}}\sin t+\frac{63150}{2501}e^{\frac{-t}{50}}

b)

sketch the solution curve as shown in attachment as graph 1:

CHECK COMMENT FOR C

3 0
2 years ago
Considerable scientific work is currently under way to determine whether weak oscillating magnetic fields such as those found ne
slega [8]

Answer:

\epsilon = 2.96 \times 10^{-11} \ V

Explanation:

given,

magnetic field strength =  1.40 ✕ 10⁻³ T

frequency of oscillation = 60 Hz

diameter of RBC = 7.5 μm

EMF = ?

\epsilon = NBA\omega

\epsilon = NB(\pi\ r^2)\ (2\pi f)

\epsilon = NB(\pi\ (\dfrac{d}{2})^2)\ (2\pi f)

\epsilon = (1)\ 1.4 \times 10^{-3}(\pi\ (\dfrac{7.5 \times 10^{-6}}{2})^2)\ (2\pi\times 60)

\epsilon = 2.96 \times 10^{-11} \ V

maximum emf that can generate around the perimeter of the cell \epsilon = 2.96 \times 10^{-11} \ V

5 0
2 years ago
Two sources emit beams of light of wavelength 550 nm. The light from source A has an intensity of 10 μW/m2, and the light from s
alexira [117]

Answer:

<em>A) Beam B carries twice as many photons per second as beam A.</em>

Explanation:

If we have two waves with the same wavelength, then their intensity is proportional to their power, or the energy per unit time.

We also know that the amount of photon present in an electromagnetic beam is proportional to the energy of the beam, hence the amount of beam per second is proportional to the power.

With these two facts, we can say that the intensity is a measure of the amount of photon per second in an electromagnetic beam. So we can say that <em>beam B carries twice as more power than beam A, or Beam B carries twice as many photons per second as beam A.</em>

3 0
2 years ago
A sample of an unknown volatile liquid was injected into a Dumas flask (mflask = 27.0928 g, Vflask = 0.1040 L) and heated until
NNADVOKAT [17]

Answer:

The gas was Hexane

Explanation:

taking the diference between the mass of the flask and the final mass qe can calculate the mass of liquid injected (assuming none escaped the flask):

m_{l}  = 27.4593g - 27.0928g = 0.3665g

with the volume of the flask we can get the density of the gas at the indicated pressure and temperature:

d_{g}  = \frac{0.3665 g}{0.1040L} = 3.524 g/L

From the ideal gases law we have that the density can be calculated as:

d_{g}  = \frac{P*M}{R*T}

Where R is the ideal gases constant = , and M the molecular weight of the fluid. Solving for M:

M=\frac{d_{g}*R*T}{P}=\frac{3.524g/L*0,082atmL/molK*291K}{0.976atm}

M=86.16 g/mol

Note that the temperature is computed in Kelvin T= 18+273=291K

The gas with the closer molar mass is Hexane

4 0
2 years ago
Other questions:
  • What is the mass of a baseball clocked moving at a speed of 105 mph or 46.9 m/s and wavelength 9.74 × 10-35m?
    8·1 answer
  • An astronaut at rest on earth has a heartbeat rate of 70 beats/min. what will this rate be when she is traveling in a spaceship
    14·1 answer
  • Write a hypothesis about the effect of increasing voltage on the current in the circuit. Use the "if . . . then . . . because .
    10·2 answers
  • A 28-kg particle exerts a gravitational force of 8.3 x 10^-9 N on a particle of mass m, which is 3.2 m away. What is m? A) 140 k
    6·1 answer
  • During a 72-ms interval, a change in the current in a primary coil occurs. This change leads to the appearance of a 6.0-mA curre
    5·1 answer
  • Enrico says that positive charge is created when you rub a glass rod with silk, and that negative charge is simply the absence o
    5·1 answer
  • Sir Lance a Lost new draw bridge was designed poorly and stops at an angle of 20o below the horizontal. Sir Lost and his steed s
    9·1 answer
  • The vector product of vectors A⃗ and B⃗ has magnitude 12.0 m2 and is in the +z-direction.Vector A⃗ has magnitude 4.0 m and is in
    12·1 answer
  • HELP PLSSSSSSS ASAP FIRST CORRECT ANSWER WILL GET BRANLIST. A bunny accidentally knocks a basket of eggs off of a table. Luckily
    11·2 answers
  • To overcome an object's inertia, it must be acted upon by __________. A. gravity B. energy C. force D. acceleration
    5·2 answers
Add answer
Login
Not registered? Fast signup
Signup
Login Signup
Ask question!