All categories

2 years ago

Which state of matter is least likely to transfer heat by convection? solid, liquid, gas, plasma

2 answers:

7 0

Hello,

Here is your answer:

The proper answer to this question is A "solid". Solid will be least likely transfer heat on something metal!

Your answer is solid!

If you need any ore help feel free to ask me!

Hope this helps!

Aneli [31]2 years ago

4 0

Answer: Option (a) is the correct answer.

Explanation:

Convection is defined as the process in which a fluid (liquid or gas) when heated then more dense (cooler) substance sinks ate the bottom whereas less dense (hotter) substance will rises at the top.

For example, boiling of cold water.

On the other hand, solid substances are able to transfer heat through the process of conduction and not convection.

Conduction is defined as a process in which two objects of different temperature are placed adjacent to each other then there will occur transfer of heat from hotter object to colder object till their temperature becomes equal.

Thus, we can conclude that solid state of matter is least likely to transfer heat by convection.

You might be interested in

For this problem, imagine that you are on a ship that is oscillating up and down on a rough sea. Assume for simplicity that this

ikadub [295]

Answer:

no idea

Explanation:

7 0

2 years ago

A container of volume 0.6 m^3 contains 5.3 mol of argon gas at 24°C. Assuming argon behaves as an ideal gas, find the total inte

Vitek1552 [10]

Answer:

the internal energy of the gas is 433089.52 J

Explanation:

let n be the number of moles, R be the gas constant and T be the temperature in Kelvins.

the internal energy of an ideal gas is given by:

Ein = 3/2×n×R×T

= 3/2×(5.3)×(8.31451)×(24 + 273)

= 433089.52 J

Therefore, the internal energy of this gas is 433089.52 J.

5 0

2 years ago

A superhero swings a magic hammer over her head in a horizontal plane. The end of the hammer moves around a circular path of rad

Korolek [52]

Answer:

9.21954 m/s

54 m/s²

Angle is zero

Explanation:

r = Radius of arm = 1.5 m

$\omega$ = Angular velocity = 6 rad/s

The horizontal component of speed is given by

$v_h=\omega r\\\Rightarrow v_h=6\times 1.5\\\Rightarrow v_h=9\ m/s$

The vertical component of speed is given by

$v_v=2\ m/s$

The resultant of the two components will give us the velocity of hammer with respect to the ground

$v=\sqrt{v_h^2+v_v^2}\\\Rightarrow v=\sqrt{9^2+2^2}\\\Rightarrow v=9.21954\ m/s$

The velocity of hammer relative to the ground is 9.21954 m/s

Acceleration in the vertical component is zero

Net acceleration is given by

$a_n=a_h=\omega^2r\\\Rightarrow a_n=6^2\times 1.5\\\Rightarrow a_n=54\ m/s^2$

Net acceleration is 54 m/s²

As the acceleration is towards the center the angle is zero.

3 0

2 years ago

A 6-in-wide polyamide F-1 flat belt is used to connect a 2-in-diameter pulley to drive a larger pulley with an angular velocity

Likurg_2 [28]

Answer:

a) Fc = 4.15 N, Fi = 435.65 N, (F1)a = 640 N, and F2 = 239.6 N,

b) Ha = 1863.75 N, nfs = 1 , length = 11.8 mm

Explanation:

Given that:

γ= 9.5 kN/m³ = 9500N/m3

b = 6 inches = 0.1524 m

t = 0.0013 mm

d = 2 inches = 0.0508 m

n = 1750 rpm

$H_{nom}=2hp=1491.4W$

L = 9 ft = 2.7432 m

Ks = 1.25

g = 9.81 m/s²

$w=\gamma b t = 9500* 0.1524*0.0013=1.88N/m$

$V=\frac{\pi d n}{60} =\pi *0.0508*1750/60=4.65 m/s$

$F_c=\frac{wV^2}{g}=1.88*4.65^2/9.81=4.15N$

$(F_1)_a=bF_aC_pC_v=0.1524*6000*0.7*1=640N$

$T=\frac{H_{nom}n_dK_s}{2\pi n}= \frac{1491*1.25*1}{2*\pi*1750/60}=10.17Nm$

$F_2=(F_1)_a-\frac{2T}{D}= 640-\frac{2*10.17}{0.0508} =239.6N$

$F_i=\frac{(F_1)_a+F_2}{2} -F_c=435.65N$

$H_a=1491*1.25=1863.75W$

$n_f_s=\frac{H_a}{H_{nom}K_S }=1$

dip = $\frac{L^2w}{8F_i} =\frac{2.7432*1.88}{435.65}=11.8mm$

7 0

2 years ago

In which atmosphere layer does 80 percent of the gas in the atmosphere<br> reside?

VladimirAG [237]

Answer: TheTroposphere contains 80% of the total gas in the atmosphere

7 0

2 years ago

Read 2 more answers