<span>The speed of longitudinal waves, S, in a thin rod = âšYoung modulus / density , where Y is in N/m^2.
So, S = âšYoung modulus/ density. Squaring both sides, we have, S^2 = Young Modulus/ density.
So, Young Modulus = S^2 * density; where S is the speed of the longitudinal wave.
Then Substiting into the eqn we have (5.1 *10^3)^2 * 2.7 * 10^3 = 26.01 * 10^6 * 2.7 *10^6 = 26.01 * 2.7 * 10^ (6+3) = 70.227 * 10 ^9</span>
<em>projectile can only follow the straight line path when it is launched upward straightly so the correct option is <u>90 degree with respect to horizontal x -axis ..:)</u></em>
Answer:
B
Explanation:
The capacitor is a component which has the ability to store energy in the form of an electrical charge making a potential difference on those two metal plates
A capacitor consists of two or more parallel conductive (metal) plates. They are electrically seperated by an insulating material (ex: air, mica,ceramic etc.) which is called as Dielectric Layer
Due to this insulating layer, DC current can not flow through the capacitor.But it allows a voltage to be present across the plates in the form of an electrical charge.
Answer:
a) The schematic illustrating is attached
b) The heat transfer to the heat engine is 2142.86 kJ, the heat transfer from the heat engine is 1392.86 kJ
c) The heat transfer to the heat engine is 1648.35 kJ, the heat transfer from the heat engine is 898.35 kJ
Explanation:
b) The heat transfer to the engine and the heat transfer from the engine to the air is:

Where
W = 750 kJ
n = 35% = 0.25
Replacing:


c) The efficiency of Carnot engine is:

The heat transfer to the heat engine is:

The heat transfer from the heat engine is:

1 watt = 1 joule/sec
2,000 watts = 2,000 joules/sec
(2,000 joule/sec) x (120 sec)
= (2,000 x 120) (joule-sec/sec)
= 240,000 joules .