Answer:
Fa=774 N
Fb=346 N
Explanation:
We will solve this problem by equating forces on each axis.
- On x-axis let forces in positive x-direction be positive and forces in negative x-direction be negative
- On y-axis let forces in positive y-direction be positive and forces in negative y-direction be negative
While towing we know that car is mot moving in y-direction so net force in y-axis must be zero
⇒∑Fy=0
⇒
⇒
⇒
Given that resultant force on car is 950N in positive x-direction
⇒∑Fx=950
⇒
⇒
⇒
⇒
⇒
⇒ 
⇒


Therefore approximately, Fa=774 N and Fb=346 N
Answer:
f3 = 102 Hz
Explanation:
To find the frequency of the sound produced by the pipe you use the following formula:

n: number of the harmonic = 3
vs: speed of sound = 340 m/s
L: length of the pipe = 2.5 m
You replace the values of n, L and vs in order to calculate the frequency:

hence, the frequency of the third overtone is 102 Hz
Answer:
0.1 m
Explanation:
It is given that,
Mass of the object, m = 350 g = 0.35 kg
Spring constant of the spring, k = 5.2 N/m
Amplitude of the oscillation, A = 10 cm = 0.1 m
Frequency of a spring mass system is given by :
Time period:
Answer:
6 hours 15 minutes
Explanation:
On the trip from L.A. to London, the plane travels at 750 mph against a headwind of 50 mph, and that makes the net 700 mph (in aviation speak, 750 is the airspeed, while 700 is the groundspeed). 5000 miles divided by 700 mph results in about 7.14 hours, or about 7 hours and 9 minutes. On the return trip, ASSUMING THE SAME WIND, the plane travels at 750 mph, but this time the wind of 50 mph is a tail wind. So the net (groundspeed) is 800 mph. Traveling 5000 miles at 800 mph only takes 6.25 hours, or 6 hours and 15 minutes.
Outbound flight 7 hours 9 minutes
Return flight 6 hours 15 minutes
Answer:
a) W=2.425kJ
b) 
c) 
d) Q=-2.425kJ
Explanation:
a)
First of all, we need to do a drawing of what the system looks like, this will help us visualize the problem better and take the best possible approach. (see attached picture)
The problem states that this will be an ideal system. This is, there will be no friction loss and all the work done by the object is transferred to the water. Therefore, we need to calculate the work done by the object when falling those 10m. Work done is calculated by using the following formula:

Where:
W=work done [J]
F= force applied [N]
d= distance [m]
In this case since it will be a vertical movement, the force is calculated like this:
F=mg
and the distance will be the height
d=h
so the formula gets the following shape:

so now e can substitute:

which yields:
W=2.425kJ
b) Since all the work is tansferred to the water, then the increase in internal energy will be the same as the work done by the object, so:

c) In order to find the final temperature of the water after all the energy has been transferred we can make use of the following formula:

Where:
Q= heat transferred
m=mass
=specific heat
= Final temperature.
= initial temperature.
So we can solve the forula for the final temperature so we get:

So now we can substitute the data we know:

Which yields:

d)
For part d, we know that the amount of heat to be removed for the water to reach its original temperature is the same amount of energy you inputed with the difference that since the energy is being removed this means that it will be negative.
